The COM-3010 PRO is a high performance air ion counter which is designed to measure negative ions
generated by Monazite, Silica and other natural ores.
It works in 5 measurement modes which include the Standard, High speed,
Automatic, Moving average and Radiation detection modes.
The highly accurate radiation detector (Geiger-Müller tube) detects radiation and converts it to the negative ion count.
It is compact, lightweight, easy to operate and good for R&D and product promotion.
Measures negative ions generated by natural ores and ceramics, that emit a very small dose of radiation, such as Monazite and Silica.
5 measurement modes, which include Standard, High speed, Automatic, Moving average and Radiation detection modes, enable efficient measurement and provide accurate data collection.
Wide measurement range of 0-100,000 (pcs/cc)
Easy operation
The highly accurate detector (Geiger-Müller tube) detects radiation!
Less likely to be affected by air flow
Light weight and compact design (approx. 420g)
Good for R&D and product promotion
Made in Japan
The COM-3010 PRO works in the Standard, High speed, Automatic, Moving average and Radiation detection modes.
This multi-functional air ion counter enables efficient measurement and provides accurate data collection.
1. Standard mode:
The counter measures the average negative ion count per 20 sec.
2. High speed mode:
The counter measures the average negative ion count per 10 sec. Good for quick measurement!
3. Automatic measurement mode:
The counter measures the average negative ion count of 8 consecutive 20 second measurements.
A thermal printer prints out the maximum/minimum/average negative ion count data
as well as the 8 negative ion counts.
4. Moving average mode:
The counter measures the average of 16 negative ion counts collected during the first 20 seconds and those collected every second during the next 15 seconds.
This mode provides more accurate negative ion count data.
It takes 35 seconds to complete the measurement.
5. Radiation detection mode:
The reading increases depending on the dose of radiation the counter detects. The larger the dose is, the faster the reading increases. Good for finding the source of the radiation.
The wide measurement range covers negative ion counts of up to 100,000(pcs/cc).
High density negative ions are within the measurement range.
It measures negative ions generated by natural ores and ceramics,
that emit a very small dose of radiation, such as Monazite and Silica.
You just push some buttons. It is good for outdoor use, product promotion, R&D and demonstration purposes.
You can always have it handy.
The highly accurate detector (Geiger-Müller tube) detects radiation and it converts it to the negative ion count.
Ion counts measured by air suction type counters can be affected by air flow as they suck air to detect negative ions.
The COM-3010 PRO does not suck air but detects radiation and converts it into the negative ion count.
This is why it is less likely to be affected by air flow.
It weights only 420g (battery excluded) and is palm sized.
The ion count data can be printed out on a thermal printer by one push-button.
The printer does not come with this counter.
(Our recommendation: Standalone Print Unit DPU-H245 by Seiko Instruments Inc.)
Specifications
Product name: Air Ion Counter for Ore COM-3010 PRO Dimensions: W77xH140xD28(53) (mm)
Weight: Less than 420g (battery excluded)
Power: 4x UM3 alkaline dry battery (operation hours approx. 60 hours)
Consumption power: Approx. 100mW
Detectable ion: Negative air ions
Measurement range: 0 to 100,000 (pcs/cc)
Detection accuracy: Approx. +/-15%
Minimum detectable (ion) density: 1 (pcs/cc)
Display: LCD, 4+1/2digit.
Detector: Pancake Geiger-Müller tube
Detector effective area: 15.5cm2 (2.3 in2)
Signal sound: Piezoelectric buzzer
Detection LED: It turns on when radiation is detected.
X10 LED: When it turns on, 10x the reading shown on the display is the actual ion count.
Buttons: POWER, PRINT, RESET, MODE
Low-battery detection: "LOBAT" is displayed when the batteries are running low.
Auto power off function: The power is automatically turned off when left unused for 15 minutes.
Data output: Printed out on a thermal printer (Does not come with the counter)
Automatic printing: The ion count data is printed out automatically after measurement.
Operating temperature range: -10C to +50C (14F to 122F)
Operating humidity range: 90% R.H. or below (no condensation)
Storage temperature range: -20C to +60C (-4F to 140F)
Storage humidity range: 90% R.H. or below (no condensation)
Accessories:
·Ore (Apatite stones) for test operation
·Soft case
Made in: Japan Limited Warranty: 1 year from the date of receipt
Stock: Yes
Measures negative ions generated by natural ores and ceramics, that emit a very small dose of radiation, such as Monazite and Silica.
Ship in 3 days
